Replacing Nutone Bathroom Fan Motor

When a Nutone bathroom fan stops working, the motor is often the culprit. Replacing the motor is a relatively simple task that can be completed in about an hour. Here's a step-by-step guide to help you get the job done.

Tools and Materials You'll Need

Before you start, gather the following tools and materials:

Replacement Nutone bathroom fan motor
Screwdriver
Wire strippers
Electrical tape
Safety glasses

Safety First

Before you begin any electrical work, be sure to turn off the power to the bathroom fan at the circuit breaker panel. Also, wear safety glasses to protect your eyes from flying debris.

Step-by-Step Instructions

Remove the fan cover. The fan cover is typically held in place by two screws. Remove the screws and carefully lift the cover off.
Disconnect the electrical wires. There will be two or three electrical wires connected to the motor. Use a screwdriver to loosen the screws holding the wires in place, and then carefully disconnect the wires.
Remove the motor. The motor is usually held in place by two screws. Remove the screws and carefully lift the motor out of the housing.
Install the new motor. Align the new motor with the housing and carefully insert it into place. Secure the motor with the two screws.
Connect the electrical wires. Connect the electrical wires to the new motor, making sure to match the colors of the wires. Tighten the screws holding the wires in place.
Replace the fan cover. Carefully lift the fan cover back into place and secure it with the two screws.
Turn on the power and test the fan. Turn on the power to the bathroom fan at the circuit breaker panel and test the fan to make sure it's working properly.

Tips

Here are a few tips to help you replace your Nutone bathroom fan motor:

If you're not comfortable working with electricity, it's best to hire a qualified electrician to do the job.
Be careful not to damage the wires when you're disconnecting them from the old motor.
Make sure to tighten the screws securely when you're connecting the wires to the new motor.
If you have any questions, consult the Nutone bathroom fan manual or contact Nutone customer service.

Conclusion

Replacing a Nutone bathroom fan motor is a simple task that can be completed in about an hour. By following the steps in this guide, you can get the job done quickly and easily.