Replacement Bathroom Exhaust Fan Motor

Your bathroom exhaust fan motor might need to be replaced if it's making excessive noise, vibrating excessively or not moving air as efficiently as it should. Replacing a bathroom exhaust fan motor is a relatively simple task that can be completed in a few hours. Here's a step-by-step guide to help you through the process:

Step 1: Turn off the power

Before you start working on the fan, make sure to turn off the power to the circuit that powers it. You can do this by flipping the circuit breaker or removing the fuse that corresponds to the circuit.

Step 2: Remove the fan cover

The fan cover is usually held in place by a few screws. Remove the screws and carefully lift the cover off the fan.

Step 3: Disconnect the motor

The motor is usually connected to the fan housing by a few wires. Disconnect the wires by loosening the screws that hold them in place.

Step 4: Remove the motor

Once the motor is disconnected, you can remove it from the fan housing by pulling it straight out. Be careful not to damage the fan blades or the fan housing.

Step 5: Install the new motor

Insert the new motor into the fan housing and align the screw holes. Secure the motor in place by tightening the screws.

Step 6: Connect the motor

Reconnect the wires to the motor by tightening the screws that hold them in place.

Step 7: Install the fan cover

Place the fan cover back on the fan and secure it with the screws.

Step 8: Turn on the power and test the fan

Turn on the power to the circuit and test the fan to make sure it's working properly.

Tips:

When choosing a replacement motor, make sure to select one that is the same size and type as the original motor.
If you're not comfortable working with electricity, it's best to hire a qualified electrician to replace the motor for you.
Replacing a bathroom exhaust fan motor is a relatively simple task, but it's important to follow the steps carefully to avoid any damage to the fan or the electrical system.