Replace Nutone Bathroom Fan Light

Nutone bathroom fan lights are a common fixture in many homes. They provide both ventilation and light in the bathroom, and they can be a lifesaver when you're trying to get ready in the morning or evening. However, even the best fan light can eventually fail, and when it does, you'll need to know how to replace it. Here are the steps on how to replace Nutone bathroom fan light:

1. Safety First

Before you start any work, make sure to turn off the power to the bathroom fan light at the circuit breaker. This will help to prevent any electrical shocks.

2. Remove the Old Fan Light

Once the power is off, you can start removing the old fan light. First, remove the grille cover by gently prying it off with a screwdriver. Then, remove the screws that are holding the fan light in place. Once the screws are removed, you can carefully pull the fan light out of the ceiling.

3. Disconnect the Wires

Once the fan light is out of the ceiling, you need to disconnect the wires. There will be two wires, one black and one white. Carefully unscrew the wire nuts that are holding the wires together, and then pull the wires apart.

4. Install the New Fan Light

Now it's time to install the new fan light. First, feed the wires from the new fan light through the hole in the ceiling. Then, connect the wires to the wires from the ceiling using wire nuts. Make sure to twist the wire nuts tightly to ensure a good connection.

Once the wires are connected, you can slide the new fan light into place. Make sure to line up the screw holes on the fan light with the screw holes in the ceiling. Then, screw the fan light into place.

5. Reinstall the Grille Cover

Once the fan light is installed, you can reinstall the grille cover. Simply snap the grille cover into place.

6. Turn on the Power

Once the grille cover is installed, you can turn on the power to the bathroom fan light at the circuit breaker. The fan light should now be working properly.

7. Test the Fan Light

Once the power is on, you should test the fan light to make sure it's working properly. Turn on the fan and the light, and make sure that both are working properly.

Conclusion

Replacing a Nutone bathroom fan light is a relatively easy task that can be completed in a few minutes. By following these steps, you can save yourself the cost of hiring an electrician.