Replace Bathroom Faucet Single Handle

Replacing a bathroom faucet is a relatively simple plumbing project that can be completed in a few hours with the right tools and materials. If your bathroom faucet is leaking or dripping, it can be a significant source of water waste. Replacing the faucet can help save water and improve the overall appearance of your bathroom.

There are two main types of bathroom faucets: single-handle and double-handle. Single-handle faucets are the most common type and are easier to install than double-handle faucets. The following instructions will show you how to replace a bathroom faucet single handle.

Tools and materials you will need:

Adjustable wrench
Basin wrench
Plumber's putty
New faucet
Teflon tape
Bucket
Flashlight

Steps:

1. Turn off the water supply to the faucet. There are usually two shutoff valves under the sink, one for the hot water and one for the cold water. Turn the valves clockwise to turn off the water.

2. Open the faucet to release any remaining water in the lines.

3. Disconnect the water supply lines from the faucet. Use an adjustable wrench to loosen the nuts that connect the water supply lines to the faucet. Be careful not to overtighten the nuts, as this can damage the lines.

4. Remove the old faucet. Use a basin wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can lift the faucet up and off the sink.

5. Apply plumber's putty to the base of the new faucet. Plumber's putty is a type of sealant that helps to create a watertight seal between the faucet and the sink.

6. Place the new faucet in the sink and tighten the nuts. Use the basin wrench to tighten the nuts that hold the faucet in place. Be sure to tighten the nuts securely, but do not overtighten them.

7. Connect the water supply lines to the faucet. Use an adjustable wrench to tighten the nuts that connect the water supply lines to the faucet. Be sure to tighten the nuts securely, but do not overtighten them.

8. Turn on the water supply and check for leaks. Slowly turn the shutoff valves under the sink to turn on the water. Use a flashlight to inspect the faucet and water supply lines for any leaks.

9. Adjust the temperature and flow of the water. Use the handle on the faucet to adjust the temperature and flow of the water. Be sure to adjust the water temperature so that it is comfortable for use.

Replacing a bathroom faucet single handle is a relatively simple plumbing project that can be completed in a few hours with the right tools and materials. By following the steps outlined in this article, you can replace your faucet and save money on professional plumbing services.