Replace Bathroom Fan Motor Nutone

If your bathroom fan is not working properly, one of the possible causes could be a faulty motor. Replacing the motor is a relatively simple task that can be completed in a few hours. Here is a step-by-step guide on how to replace a Nutone bathroom fan motor:

Step 1: Safety First

Before you begin, turn off the power to the bathroom fan at the circuit breaker. This will prevent any electrical shock hazards.

Step 2: Remove the Fan Grille

Locate the screws that hold the fan grille in place and remove them. The grille should then come off easily.

Step 3: Disconnect the Wiring

Once the grille is removed, you will see the fan motor. Disconnect the wires that are connected to the motor. Make sure to label the wires so that you can reconnect them correctly later.

Step 4: Remove the Motor

Unscrew the screws that hold the motor in place and remove the motor from the fan housing.

Step 5: Install the New Motor

Take the new motor and insert it into the fan housing. Secure the motor with the screws.

Step 6: Reconnect the Wiring

Reconnect the wires to the motor, making sure to match the colors of the wires with the corresponding terminals on the motor.

Step 7: Reinstall the Fan Grille

Place the fan grille back over the fan housing and secure it with the screws.

Step 8: Turn on the Power

Turn on the power to the bathroom fan at the circuit breaker. The fan should now be working properly.

Additional Tips:

Before you start working on the fan, make sure that the power is turned off.
Label the wires before you disconnect them so that you can reconnect them correctly later.
If you are not comfortable working with electrical wiring, it is best to hire a qualified electrician to replace the fan motor.

By following these steps, you can easily replace the motor in your Nutone bathroom fan and get it working properly again.