Replace Bathroom Exhaust Fan Cover

If the exhaust fan cover in your bathroom is looking old, dirty, or damaged, replacing it is a relatively simple and inexpensive way to update the look of your bathroom. Here are the steps on how to replace a bathroom exhaust fan cover:

Tools and Materials:

New exhaust fan cover
Screwdriver
Utility knife
Caulk gun
Caulk

Step 1: Remove the old exhaust fan cover.

Turn off the power to the exhaust fan at the circuit breaker or fuse box. Locate the screws that hold the old exhaust fan cover in place and remove them. Carefully pull the old exhaust fan cover off the fan housing.

Step 2: Clean the fan housing.

Use a damp cloth to clean the fan housing. Remove any dust, dirt, or debris that has accumulated on the housing.

Step 3: Install the new exhaust fan cover.

Align the new exhaust fan cover with the fan housing and insert the screws. Tighten the screws until the cover is secure.

Step 4: Caulk around the exhaust fan cover.

Apply a bead of caulk around the perimeter of the exhaust fan cover. This will help to seal the cover and prevent moisture from getting into the fan housing.

Step 5: Turn on the power to the exhaust fan.

Turn on the power to the exhaust fan at the circuit breaker or fuse box. Test the exhaust fan to make sure that it is working properly.

Tips:

When choosing a new exhaust fan cover, be sure to select one that is the same size as the old cover.
If the old exhaust fan cover is damaged, you may need to replace the entire exhaust fan.
It is important to clean the fan housing before installing the new exhaust fan cover. This will help to ensure that the new cover fits properly and lasts for a long time.
Caulking around the exhaust fan cover will help to prevent moisture from getting into the fan housing.
Be sure to test the exhaust fan after replacing the cover to make sure that it is working properly.