Nutone Bathroom Fan With Light Replacement Parts

Nutone bathroom fans with lights are a great way to improve the ventilation and lighting in your bathroom, but like any other appliance, they can eventually wear out and need to be replaced. If your Nutone bathroom fan with light is no longer working properly, don't worry, you can replace the parts yourself with a little bit of know-how. Here's a guide on how to replace the most common Nutone bathroom fan with light replacement parts:

1. Safety First

Before you start working on your bathroom fan, make sure to turn off the power at the circuit breaker or fuse box. This will help to prevent any electrical shock hazards. Also, remove the light bulb from the fixture and put on a pair of safety glasses.

2. Remove the Fan Grille

The fan grille is the plastic or metal cover that is held in place by screws. Remove the screws that are holding the grille in place, then carefully lift the grille off the fan housing.

3. Disconnect the Wiring

Once the grille is removed, you will see the wiring that is connected to the fan motor and light fixture. Disconnect the wiring by carefully pulling the wire nuts off of the wires. Be careful not to damage the wires or the wire nuts.

4. Remove the Fan Motor

The fan motor is held in place by screws. Remove the screws, then carefully lift the fan motor out of the fan housing. Be careful not to damage the fan motor or the fan housing.

5. Replace the Fan Motor

Take the new fan motor and place it into the fan housing. Secure the fan motor in place with the screws that you removed earlier.

6. Connect the Wiring

Connect the wiring to the new fan motor by carefully pushing the wire nuts back onto the wires. Make sure that the wires are connected correctly, then tighten the wire nuts securely.

7. Reinstall the Fan Grille

Take the fan grille and place it back onto the fan housing. Secure the grille in place with the screws that you removed earlier.

8. Test the Fan

Turn the power back on at the circuit breaker or fuse box, then turn on the light switch in the bathroom. The fan should now be working properly.

Conclusion

Replacing the parts in a Nutone bathroom fan with light is a relatively simple task that can be completed in a few minutes. By following these steps, you can ensure that your fan is working properly and providing your bathroom with the ventilation and lighting that you need.