Laying Wall Tiles In Bathroom

Tiling a bathroom wall is a great way to add style and value to your home. It's a relatively simple project that can be completed in a weekend with the right tools and materials. Here's a step-by-step guide to help you get started.

Materials You'll Need

Ceramic or porcelain tiles
Thin-set mortar
Grout
Tile spacers
Notched trowel
Grout float
Sponge
Bucket
Measuring tape
Level
Safety glasses
Dust mask

Step 1: Prepare the Wall

Before you start tiling, you need to prepare the wall by cleaning it and removing any dirt, dust, or debris. If the wall is uneven, you may need to level it using a leveling compound.

Step 2: Layout the Tiles

Once the wall is prepared, you need to layout the tiles to determine the best placement. Start by finding the center of the wall and marking it with a pencil. Then, measure out from the center and mark the location of the tiles. Use tile spacers to ensure that the tiles are evenly spaced.

Step 3: Apply Thin-Set Mortar

Once the tiles are laid out, you can start applying thin-set mortar to the wall. Use a notched trowel to spread the mortar evenly over the wall. Be sure to press the mortar into the grooves of the trowel.

Step 4: Set the Tiles

Once the mortar is applied, you can start setting the tiles. Press the tiles firmly into the mortar and use a level to ensure that they are level. Use tile spacers to keep the tiles evenly spaced apart.

Step 5: Grout the Tiles

Once the tiles are set, you can grout them. Grout is a thin paste that is used to fill in the gaps between the tiles. Use a grout float to apply the grout to the joints between the tiles. Press the grout into the joints and smooth it out.

Step 6: Clean the Tiles

Once the grout is applied, you need to clean the tiles. Use a sponge to wipe away any excess grout from the surface of the tiles. Be sure to rinse the sponge frequently.

Step 7: Seal the Tiles

Once the tiles are clean, you need to seal them to protect them from water and stains. Apply a tile sealer to the tiles using a sponge or brush. Allow the sealer to dry according to the manufacturer's instructions.