Installing A Delta Bathroom Faucet

Installing a new bathroom faucet can be a great way to update the look of your bathroom and improve its functionality. Delta faucets are a popular choice for many homeowners because they are stylish, durable, and easy to install. In this article, we will provide you with step-by-step instructions on how to install a Delta bathroom faucet.

Tools and Materials You Will Need

Before you begin, you will need to gather the following tools and materials:

New Delta bathroom faucet
Adjustable wrench
Plumber's putty
Teflon tape
Basin wrench
Phillips head screwdriver
Flat head screwdriver

Step-by-Step Instructions

Once you have gathered all of the necessary tools and materials, you can begin the installation process. Here are the step-by-step instructions:

Step 1: Turn Off the Water Supply

The first step is to turn off the water supply to your bathroom faucet. You can do this by closing the shut-off valves located under the sink.

Step 2: Remove the Old Faucet

Once the water supply is turned off, you can remove the old faucet. To do this, use an adjustable wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can pull the faucet up and off of the sink.

Step 3: Clean the Sink Surface

Before you install the new faucet, you need to clean the sink surface where the faucet will be mounted. Use a damp cloth to wipe away any dirt or debris.

Step 4: Apply Plumber's Putty

Apply a thin bead of plumber's putty around the base of the new faucet. This will help to seal the faucet and prevent leaks.

Step 5: Install the New Faucet

Place the new faucet over the mounting holes in the sink. Use the adjustable wrench to tighten the nuts that hold the faucet in place. Be sure to tighten the nuts securely, but do not overtighten them.

Step 6: Install the Escutcheon

The escutcheon is the decorative plate that covers the base of the faucet. Place the escutcheon over the base of the faucet and secure it with the screws provided.

Step 7: Connect the Water Supply Lines

Connect the hot and cold water supply lines to the corresponding valves on the faucet. Use Teflon tape to wrap the threads of the water supply lines to help prevent leaks.

Step 8: Turn On the Water Supply

Once the water supply lines are connected, you can turn on the water supply. Check for leaks around the base of the faucet and the water supply lines. If you see any leaks, tighten the nuts or screws that are causing the leak.

Step 9: Test the Faucet

Once you have checked for leaks, you can test the faucet. Turn on the hot and cold water and adjust the handles to control the water flow and temperature.

Congratulations! You have now successfully installed a Delta bathroom faucet. Enjoy your new faucet and the updated look of your bathroom.