How To Take Stopper Out Of Bathroom Sink

How to Take Stopper Out of Bathroom Sink

A bathroom sink stopper is a small device that prevents water from draining out of the sink. It is typically made of rubber or plastic and fits into the drain hole. Over time, the stopper can become clogged with hair, soap scum, and other debris, which can make it difficult to remove. If the stopper is not removed regularly, it can eventually cause the sink to drain slowly or even clog completely. Thankfully removing a bathroom sink stopper is not a difficult task and can be done in a few simple steps.

Materials

* Pliers * Adjustable wrench * Screwdriver * Bucket * Rags

Instructions

1. Turn off the water supply to the sink. This is typically done by turning off the valves under the sink. 2. Open the drain stopper. If the stopper is not already open, open it by turning the knob or lever counterclockwise. 3. Remove the drain cover. The drain cover is the metal or plastic piece that covers the drain hole. It is typically held in place by screws or clips. Use a screwdriver or pliers to remove the screws or clips and then lift off the drain cover. 4. Locate the stopper screw. The stopper screw is a small screw that holds the stopper in place. It is typically located in the center of the drain hole. 5. Loosen the stopper screw. Use a screwdriver or adjustable wrench to loosen the stopper screw. Be careful not to overtighten the screw, as this can damage the stopper. 6. Remove the stopper. Once the stopper screw is loose, you should be able to remove the stopper by hand. If the stopper is stuck, you can use pliers to gently pry it out. 7. Clean the stopper and drain. Once the stopper is removed, clean it with soap and water. You should also clean the drain hole to remove any debris. 8. Reinstall the stopper. To reinstall the stopper, simply insert it into the drain hole and tighten the stopper screw. Be sure to tighten the screw snugly, but do not overtighten it. 9. Turn on the water supply to the sink. Once the stopper is reinstalled, turn on the water supply and check for leaks. If there are any leaks, tighten the stopper screw further.

Tips

* If you have a pop-up stopper, you will need to use a different method to remove it. Pop-up stoppers are typically held in place by a spring or lever. To remove a pop-up stopper, you will need to use a pair of pliers to compress the spring or lever and then pull the stopper out of the drain hole. * If you are unable to remove the stopper yourself, you can call a plumber for assistance.