How To Replace Bathroom Sink Faucet

How to Replace a Bathroom Sink Faucet

Replacing a bathroom sink faucet is a relatively simple plumbing project that can be completed in a few hours. With a few basic tools and a little know-how, you can save yourself the cost of hiring a plumber. Here are the steps on how to replace a bathroom sink faucet:

1. Gather the necessary tools and materials.

New bathroom sink faucet
Adjustable wrench
Plumber's putty
Teflon tape
Bucket
Rag

2. Turn off the water supply.

Locate the shut-off valves beneath the sink and turn them clockwise to turn off the water supply. If there are no shut-off valves, you will need to turn off the main water supply to your home.

3. Disconnect the old faucet.

Use the adjustable wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can remove the old faucet by pulling it straight up.

4. Clean the sink surface.

Use a rag to clean the surface of the sink where the new faucet will be installed. This will help to ensure a good seal.

5. Apply plumber's putty.

Roll out a small piece of plumber's putty into a rope and place it around the base of the new faucet. This will help to seal the faucet and prevent leaks.

6. Wrap Teflon tape around the threads.

Wrap several layers of Teflon tape around the threads of the new faucet. This will help to create a watertight seal.

7. Install the new faucet.

Insert the new faucet into the hole in the sink and tighten the nuts until they are snug. Do not overtighten the nuts, as this can damage the faucet or the sink.

8. Turn on the water supply.

Turn on the shut-off valves beneath the sink to turn on the water supply. Check for leaks around the base of the faucet. If there are any leaks, tighten the nuts until the leak stops.

9. Finish up.

Once the faucet is installed and there are no leaks, you can finish up by cleaning up the area and disposing of the old faucet.

Replacing a bathroom sink faucet is a simple plumbing project that can be completed in a few hours. With a few basic tools and a little know-how, you can save yourself the cost of hiring a plumber. By following these steps, you can easily replace your bathroom sink faucet and enjoy a new, updated look.