How To Replace Bathroom Cabinet

Replacing a bathroom cabinet can be a daunting task, but it can be done with a little planning and effort. Here are the steps on how to do it:

1. Remove the old cabinet

Before you can install a new cabinet, you need to remove the old one. To do this, you will need to disconnect the water supply and drain lines, then remove the countertop and backsplash. Once the countertop and backsplash are removed, you can unscrew the cabinet from the wall and lift it out.

2. Install the new cabinet

Once the old cabinet is removed, you can install the new one. To do this, you will need to first level the cabinet on the wall, then secure it with screws. Once the cabinet is secure, you can reconnect the water supply and drain lines, then install the countertop and backsplash.

3. Finish the installation

Once the cabinet is installed, you can finish the installation by caulking the seams around the cabinet and countertop. You can also add new hardware to the cabinet to give it a fresh look.

Here are some tips for replacing a bathroom cabinet:

Make sure to turn off the water supply before you start working.
Wear gloves and safety glasses when removing the old cabinet.
Be careful not to damage the walls or countertop when removing the old cabinet.
Use a level to make sure that the new cabinet is level before you secure it to the wall.
Caulk the seams around the cabinet and countertop to prevent water damage.
Add new hardware to the cabinet to give it a fresh look.