How To Replace A Tile In The Bathroom

Bathroom tile replacement is not a difficult job and can be completed in a few simple steps. With a little time and patience, you can have your bathroom looking new again.

Step 1: Gather Your Tools

Before you get started, you will need to gather a few tools. These include:

A hammer
A chisel
A putty knife
A grout saw
Thin-set mortar
Grout
A sponge
A bucket

Step 2: Remove The Damaged Tile

Once you have your tools, you can begin removing the damaged tile. Start by using a grout saw to cut out the grout around the tile. Then, use a hammer and chisel to break the tile into small pieces. Be careful not to damage the surrounding tiles.

Step 3: Clean The Area

Once the damaged tile has been removed, you will need to clean the area thoroughly. Use a putty knife to remove any remaining mortar or grout. Then, wipe the area down with a damp sponge.

Step 4: Apply Thin-Set Mortar

Next, you will need to apply thin-set mortar to the back of the new tile. Use a trowel to spread the mortar evenly over the entire surface of the tile. Be sure to press the tile firmly into place.

Step 5: Grout The Tile

Once the tile has been set, you will need to grout it. Use a grout float to spread the grout over the joints between the tiles. Be sure to press the grout firmly into the joints.

Step 6: Clean Up

Once the grout has dried, you will need to clean up the area. Use a damp sponge to wipe away any excess grout. Then, let the area dry completely.

Replacing a tile in the bathroom is a simple job that can be completed in a few simple steps. With a little time and patience, you can have your bathroom looking new again.