How To Repair Tile Grout In Bathroom

Tile grout is a crucial component of any tiled surface, as it fills the gaps between tiles and helps to keep water and dirt from seeping through. However, grout can become damaged over time due to wear and tear, moisture, or improper cleaning. Fortunately, repairing tile grout is a relatively simple and inexpensive task that can be completed in a few hours.

Materials You'll Need:

Grout removal tool
New grout
Grout float
Sponge
Bucket of water
Grout sealer (optional)

Step 1: Remove the Old Grout

Using a grout removal tool, carefully scrape out the old grout from the joints between the tiles. Be sure to remove all of the old grout, but be careful not to damage the tiles.

Step 2: Clean the Joints

Once the old grout has been removed, clean the joints between the tiles with a sponge and bucket of water. This will remove any remaining dust or debris.

Step 3: Mix the New Grout

According to the manufacturer's instructions, mix the new grout in a bucket of water. The grout should be mixed until it has a smooth, creamy consistency.

Step 4: Apply the New Grout

Using a grout float, apply the new grout to the joints between the tiles. Press the grout firmly into the joints, making sure to fill them completely.

Step 5: Remove Excess Grout

Once the grout has been applied, use a damp sponge to remove any excess grout from the surface of the tiles. Be sure to wipe the sponge clean frequently to avoid smearing the grout.

Step 6: Allow the Grout to Dry

Allow the grout to dry completely for 24 hours before using the shower or bath. During this time, keep the area well-ventilated to allow the grout to cure properly.

Step 7: Seal the Grout (Optional)

Once the grout has dried, you can apply a grout sealer to help protect it from water and stains. Apply the sealer according to the manufacturer's instructions.

By following these steps, you can easily repair tile grout in your bathroom and keep your tiled surfaces looking their best.