How To Repair Bathroom Faucet Handle

How to Repair a Bathroom Faucet Handle

A leaky or loose bathroom faucet handle can be a nuisance, but it's a relatively easy problem to fix. With a few simple tools and a little bit of know-how, you can have your faucet handle working like new again in no time.

Step 1: Gather your tools

You will need the following tools to repair a bathroom faucet handle: * Adjustable wrench * Phillips head screwdriver * Flat head screwdriver * Allen wrench (if your faucet has a set screw) * Replacement faucet handle (if necessary)

Step 2: Turn off the water supply

Before you start working on the faucet, you need to turn off the water supply. This will prevent water from spraying out of the faucet when you remove the handle.

To turn off the water supply, locate the shut-off valves under the sink. The shut-off valves are usually located near the base of the faucet, and they will have handles that you can turn by hand. Turn the handles clockwise to turn off the water supply.

Step 3: Remove the old handle

Once the water supply is turned off, you can remove the old faucet handle. To do this, use a screwdriver to remove the screw that is holding the handle in place.

Once the screw is removed, you can pull the handle straight off of the faucet stem.

Step 4: Inspect the faucet stem

Once the handle is removed, you will be able to see the faucet stem. The faucet stem is the part of the faucet that controls the flow of water.

Inspect the faucet stem for any damage. If the stem is damaged, you will need to replace it. To replace the faucet stem, simply unscrew the old stem and screw in the new stem.

Step 5: Install the new handle

If the faucet stem is not damaged, you can install the new handle. To do this, simply insert the handle onto the faucet stem and tighten the screw.

Step 6: Turn on the water supply

Once the new handle is installed, you can turn on the water supply. To do this, simply turn the handles on the shut-off valves counterclockwise.

Step 7: Test the faucet

Once the water supply is turned on, test the faucet to make sure that it is working properly. The faucet should turn on and off smoothly, and there should be no leaks.

If the faucet is still leaking, you may need to tighten the packing nut. The packing nut is located at the base of the faucet stem, and it can be tightened using an adjustable wrench.