How To Repair A Leaking Bathroom Faucet

A leaking bathroom faucet is a common problem that can waste water and increase your water bill. Fortunately, it is a relatively easy problem to fix. In this article, we will provide you with a step-by-step guide on how to repair a leaking bathroom faucet.

Step 1: Gather Your Tools and Materials

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Replacement faucet washer
Plumber's tape
Rags

Step 2: Turn Off the Water Supply

Before you begin working on the faucet, you need to turn off the water supply. There is usually a shut-off valve under the sink. Turn the valve clockwise to turn off the water.

Step 3: Remove the Faucet Handle

Once the water is turned off, you can remove the faucet handle. Most faucet handles are held in place by a screw. Use a Phillips head screwdriver to remove the screw and then pull the handle off.

Step 4: Remove the Faucet Cartridge

Once the handle is removed, you will see the faucet cartridge. The cartridge is a cylindrical-shaped component that contains the washer. To remove the cartridge, use a flat head screwdriver to pry it out of the faucet body.

Step 5: Replace the Faucet Washer

The faucet washer is a small rubber washer that creates a seal between the cartridge and the faucet body. Over time, the washer can become worn or damaged, which can cause a leak. To replace the washer, simply remove the old washer and replace it with a new one.

Step 6: Reassemble the Faucet

Once the new washer is in place, you can reassemble the faucet. Insert the cartridge back into the faucet body and tighten it with a wrench. Then, reattach the handle and tighten the screw.

Step 7: Turn On the Water

Once the faucet is reassembled, turn on the water supply and check for leaks. If there are no leaks, then you have successfully repaired the faucet.

Tips for Preventing Future Leaks