How To Repair A Dripping Bathroom Faucet

A dripping bathroom faucet is not only annoying, but it can also waste a lot of water. If you're tired of dealing with a leaky faucet, there are a few things you can do to fix it yourself. Here's a step-by-step guide on how to repair a dripping bathroom faucet:

1. Gather your tools. You will need the following tools to repair a dripping bathroom faucet:

Adjustable wrench
Phillips head screwdriver
Flathead screwdriver
Replacement faucet washer
Plumber's putty

2. Turn off the water supply. Before you start working on the faucet, you need to turn off the water supply. There are usually two shut-off valves under the sink. Turn both valves clockwise to turn off the water.

3. Remove the faucet handle. Once the water is turned off, you can remove the faucet handle. Most faucet handles are held in place by a screw. Use a Phillips head screwdriver to remove the screw and then pull the handle straight up.

4. Remove the packing nut. Once the faucet handle is removed, you will see the packing nut. The packing nut is a large nut that is located at the base of the faucet stem. Use an adjustable wrench to loosen the packing nut and then remove it by hand.

5. Remove the faucet stem. Once the packing nut is removed, you can remove the faucet stem. The faucet stem is a long, thin metal rod that is located inside the faucet body. Use a flathead screwdriver to pry the faucet stem out of the faucet body.

6. Inspect the faucet washer. Once the faucet stem is removed, you can inspect the faucet washer. The faucet washer is a small, rubber washer that is located at the bottom of the faucet stem. If the faucet washer is worn or damaged, it will need to be replaced.

7. Replace the faucet washer. To replace the faucet washer, simply remove the old washer and replace it with a new one. Make sure that the new washer is the same size and shape as the old one.

8. Reassemble the faucet. Once the new faucet washer is in place, you can reassemble the faucet. Start by inserting the faucet stem back into the faucet body. Then, tighten the packing nut by hand. Finally, replace the faucet handle and tighten the screw.

9. Turn on the water supply. Once the faucet is reassembled, you can turn on the water supply. Check for leaks and make sure that the faucet is working properly.

If you follow these steps, you should be able to repair a dripping bathroom faucet in no time. However, if you are not comfortable working on plumbing fixtures, it is always best to call a professional plumber.