How To Remove The Bathroom Sink Stopper

The bathroom sink stopper is a small but essential part of any bathroom. It helps to keep water from draining out of the sink, and it can also be used to prevent hair and other debris from clogging the drain. However, over time, the sink stopper can become clogged with soap scum, hair, and other debris, which can make it difficult to remove. If you're having trouble removing the sink stopper, don't worry - there are a few simple steps you can follow to do it safely and easily.

Step 1: Gather your materials

Before you begin, you'll need to gather a few materials. These include:

A pair of pliers
A screwdriver
A bucket or bowl
A cloth or sponge

Step 2: Turn off the water supply

Once you have your materials, you'll need to turn off the water supply to the sink. This will prevent water from leaking out of the sink while you're working. To turn off the water supply, simply turn the handle on the water supply valves located under the sink. Once the water supply is turned off, open the faucet to release any remaining water in the lines.

Step 3: Remove the drain stopper

Now that the water supply is turned off, you can remove the drain stopper. To do this, use the pliers to grip the drain stopper and turn it counterclockwise. The drain stopper should come loose easily. If the drain stopper is stuck, you may need to use the screwdriver to pry it loose. Be careful not to damage the drain stopper or the sink.

Step 4: Clean the drain stopper

Once the drain stopper is removed, you can clean it. To do this, use the cloth or sponge to wipe away any soap scum, hair, or other debris. You can also use a mild cleanser to clean the drain stopper, if needed. Once the drain stopper is clean, rinse it thoroughly with water.

Step 5: Reinstall the drain stopper

Once the drain stopper is clean, you can reinstall it. To do this, simply insert the drain stopper into the drain hole and turn it clockwise to tighten it. Make sure the drain stopper is tight enough to prevent water from leaking out of the sink, but not so tight that it's difficult to remove.

Step 6: Turn on the water supply

Once the drain stopper is reinstalled, you can turn on the water supply. To do this, simply turn the handle on the water supply valves located under the sink. Once the water supply is turned on, check for any leaks around the drain stopper. If you see any leaks, tighten the drain stopper further.