How To Remove Stopper From Bathroom Sink Drain

A bathroom sink stopper is a small but important part of the sink. It helps to keep water in the sink when you need it and to drain water out when you don't. But what do you do when the stopper gets stuck? Don't worry, it's actually quite easy to remove a stopper from a bathroom sink drain. Here's how to do it:

Materials You'll Need:

Pliers
Adjustable wrench
Cloth
Baking soda
Vinegar

Step 1: Turn off the water supply.

The first step is to turn off the water supply to the sink. This will help to prevent water from spraying everywhere when you remove the stopper.

Step 2: Remove the drain cover.

The drain cover is the small, round cover that sits over the drain hole. You can usually remove it by hand, but if it's stuck, you can use a pair of pliers or an adjustable wrench to loosen it.

Step 3: Locate the stopper.

Once the drain cover is removed, you'll be able to see the stopper. It's usually a small, round piece of rubber or plastic that sits in the drain hole.

Step 4: Remove the stopper.

There are a few different ways to remove a stopper. If the stopper is loose, you can usually just pull it out by hand. If it's stuck, you can try using a pair of pliers or an adjustable wrench to loosen it.

If the stopper is really stuck, you may need to use a chemical solvent to dissolve the seal. You can try using baking soda and vinegar. Pour baking soda down the drain and let it sit for a few minutes. Then, pour vinegar down the drain and let it sit for a few minutes. The baking soda and vinegar will react to create a chemical reaction that will dissolve the seal.

Step 5: Clean the drain.

Once the stopper is removed, you should clean the drain. You can do this by pouring a cup of bleach down the drain and letting it sit for a few minutes. Then, flush the drain with hot water.

Step 6: Reinstall the drain cover.

Once the drain is clean, you can reinstall the drain cover. Simply place the drain cover over the drain hole and press down until it snaps into place.

Step 7: Turn on the water supply.

Once the drain cover is reinstalled, you can turn on the water supply to the sink. Check for leaks and make sure that the stopper is working properly.

Tips:

If you're having trouble removing the stopper, you can try using a pair of pliers or an adjustable wrench to loosen it.
If the stopper is really stuck, you may need to use a chemical solvent to dissolve the seal.
Once the stopper is removed, you should clean the drain to prevent clogs.
If you're not comfortable removing the stopper yourself, you can call a plumber for help.