How To Remove Bathroom Faucet From Sink

Bathroom faucets can become worn out or damaged over time, and may need to be replaced. If you are comfortable working with plumbing, you can remove the old faucet and install a new one yourself. Here is a step-by-step guide on how to remove a bathroom faucet from a sink:

Step 1: Gather Your Tools and Materials

You will need the following tools and materials to remove a bathroom faucet:

Adjustable wrench
Basin wrench
Phillips head screwdriver
Flat head screwdriver
Bucket
Rags

Step 2: Shut Off the Water Supply

Before you start working on the faucet, you need to shut off the water supply to the sink. There should be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to shut off the water.

Step 3: Open the Faucets

Once the water supply is turned off, open the faucets to release any remaining water from the lines. This will help to prevent water from leaking out when you remove the faucet.

Step 4: Disconnect the Water Supply Lines

Use the adjustable wrench to disconnect the water supply lines from the faucet. There will be two nuts that need to be loosened, one for the hot water line and one for the cold water line. Be careful not to overtighten the nuts, as this can damage the lines.

Step 5: Remove the Mounting Nuts

Under the sink, there will be two mounting nuts that hold the faucet in place. Use the basin wrench to loosen these nuts. Be careful not to drop the nuts into the sink, as they can be difficult to retrieve.

Step 6: Remove the Faucet

Once the mounting nuts are loose, you should be able to lift the faucet up and out of the sink. If the faucet is stuck, you can try gently rocking it back and forth until it comes loose.

Step 7: Clean the Sink and Faucet

Once the faucet is removed, take some time to clean the sink and the new faucet. This will help to prevent any leaks or problems in the future.

Step 8: Install the New Faucet

Once the sink and faucet are clean, you can install the new faucet. Follow the instructions that came with the new faucet, and be sure to tighten all of the connections securely.

Step 9: Turn On the Water Supply

Once the new faucet is installed, turn on the water supply and check for leaks. If there are any leaks, tighten the connections until the leak stops.

Conclusion

Removing a bathroom faucet from a sink is a relatively simple task that can be completed in about 30 minutes. By following these steps, you can save yourself the cost of hiring a plumber.