How To Remove Bathroom Cabinet

Removing a bathroom cabinet can be a relatively simple task, but it is important to follow the steps carefully to avoid damaging the cabinet or the wall. Here are the steps on how to remove a bathroom cabinet:

1. Safety First

Before you begin, be sure to turn off the water supply to the bathroom and disconnect any electrical cords that are plugged into the cabinet. You should also remove any items from the cabinet.

2. Remove the Doors and Shelves

If the cabinet has doors, remove them by unscrewing the hinges. If the cabinet has shelves, remove them by unscrewing the brackets that hold them in place.

3. Disconnect the Plumbing

If the cabinet is connected to any plumbing, such as a sink or toilet, disconnect the plumbing by unscrewing the nuts or bolts that hold it in place. Be sure to have a bucket on hand to catch any water that may leak out.

4. Remove the Screws

Once the doors, shelves, and plumbing have been removed, you can remove the screws that hold the cabinet to the wall. There will typically be two or three screws on each side of the cabinet.

5. Carefully Pull the Cabinet Away from the Wall

Once the screws have been removed, carefully pull the cabinet away from the wall. Be sure to support the cabinet with one hand as you pull it away. If the cabinet is heavy, you may need to have someone help you lift it.

6. Patch the Holes

Once the cabinet has been removed, you will need to patch the holes that were left by the screws. You can do this by filling the holes with spackling paste or wood filler. Once the spackling paste or wood filler has dried, you can sand it smooth and paint over it.

7. Install the New Cabinet

Once the holes have been patched, you can install the new cabinet. To do this, simply reverse the steps that you followed to remove the old cabinet. Be sure to level the cabinet before you screw it into place.

8. Reconnect the Plumbing and Electrical

Once the new cabinet is installed, you can reconnect the plumbing and electrical. Be sure to turn on the water supply and plug in any electrical cords.

9. Put the Finishing Touches

Once the plumbing and electrical have been reconnected, you can put the finishing touches on the bathroom. This may include adding the doors, shelves, and any other items that you removed from the old cabinet.

Conclusion

Removing a bathroom cabinet is a relatively simple task that can be completed in a few hours. By following the steps above, you can remove your old bathroom cabinet and install a new one without any problems.