How To Measure For A Bathroom Sink

How to Measure for a Bathroom Sink

Installing a new bathroom sink is a relatively simple project that can be completed in a few hours. However, it is important to measure carefully before you begin, to ensure that the new sink will fit properly. Here is a step-by-step guide to measuring for a bathroom sink:

1. Measure the width of the vanity.

This is the most important measurement, as it will determine the maximum width of the sink that you can install. To measure the width of the vanity, use a measuring tape to measure the distance between the left and right sides of the vanity.

2. Measure the depth of the vanity.

This measurement is less important than the width, but it is still important to take it into account. To measure the depth of the vanity, use a measuring tape to measure the distance from the front to the back of the vanity.

3. Measure the height of the vanity.

This measurement is only necessary if you are installing a vessel sink. To measure the height of the vanity, use a measuring tape to measure the distance from the floor to the top of the vanity.

4. Measure the distance between the center of the faucet holes.

This measurement is important if you are installing a new faucet. To measure the distance between the center of the faucet holes, use a measuring tape to measure the distance between the two holes.

5. Measure the diameter of the drain hole.

This measurement is important if you are installing a new drain. To measure the diameter of the drain hole, use a measuring tape to measure the diameter of the hole. Once you have taken all of these measurements, you can use them to select the right bathroom sink for your needs. It is always a good idea to double-check your measurements before you purchase a sink, to ensure that it will fit properly.