How To Fix Drain Stopper In Bathroom Sink

How to Fix a Drain Stopper in a Bathroom Sink

A broken drain stopper can be a frustrating plumbing problem. You can fix it yourself with a few simple tools and supplies. Here's a step-by-step guide to help you fix a drain stopper in a bathroom sink:

Step 1: Gather Your Tools and Materials

You will need the following tools and materials to fix a drain stopper:

Pliers
Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Replacement drain stopper
Plumber's putty
Rags

Step 2: Remove the Old Drain Stopper

Turn off the water supply to the sink. Use pliers to loosen the nut that holds the drain stopper in place. Once the nut is loose, use an adjustable wrench to remove it completely. Once the nut is removed, you can pull the drain stopper out of the drain hole.

Step 3: Clean the Drain Hole

Once the old drain stopper is removed, use a rag to clean the drain hole. Remove any debris or old plumber's putty from the drain hole. This will help ensure that the new drain stopper fits properly.

Step 4: Apply Plumber's Putty

Apply a ring of plumber's putty around the base of the new drain stopper. The plumber's putty will help to seal the drain stopper in place and prevent leaks.

Step 5: Insert the New Drain Stopper

Insert the new drain stopper into the drain hole. Make sure that the plumber's putty is evenly distributed around the base of the drain stopper. Turn on the water supply and check for leaks.

Step 6: Tighten the Nut

Use an adjustable wrench to tighten the nut that holds the drain stopper in place. Do not overtighten the nut, as this could damage the drain stopper or the sink.

Step 7: Test the Drain Stopper

Turn on the water and check for leaks. If there are no leaks, the drain stopper is properly installed. Congratulations, you have successfully fixed the drain stopper in your bathroom sink!