How To Fix A Leaky Moen Bathroom Faucet

Moen bathroom faucets are a popular choice for their durability and style. However, like any other faucet, they can develop leaks over time. If you have a leaky Moen bathroom faucet, it's important to fix it as soon as possible to avoid water damage. Here's a step-by-step guide on how to fix a leaky Moen bathroom faucet:

Gather your tools

Before you start, you'll need to gather a few tools. You'll need a wrench, a screwdriver, and a pair of pliers. You may also need a replacement cartridge, depending on the cause of the leak.

Turn off the water supply

The first step is to turn off the water supply to the faucet. There will be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water.

Remove the handle

Once the water is turned off, you can remove the handle. There will be a small screw on the side of the handle. Use the screwdriver to remove the screw, and then pull the handle straight up to remove it.

Remove the cartridge

The cartridge is the part of the faucet that controls the flow of water. To remove the cartridge, use the wrench to loosen the nut that holds it in place. Once the nut is loose, you can pull the cartridge straight out of the faucet.

Inspect the cartridge

Once you have removed the cartridge, inspect it for any signs of damage. If the cartridge is damaged, you will need to replace it. You can purchase a new cartridge at your local hardware store.

Install the new cartridge

If the cartridge is not damaged, you can simply reinstall it. To do this, insert the cartridge into the faucet and tighten the nut that holds it in place. Be sure to tighten the nut securely, but do not overtighten it.

Replace the handle

Once the cartridge is installed, you can replace the handle. To do this, simply insert the handle into the faucet and tighten the screw that holds it in place.

Turn on the water supply

The final step is to turn on the water supply and check for leaks. Turn the shut-off valves counterclockwise to turn on the water. Once the water is on, check all of the connections for leaks. If there are no leaks, the repair is complete.