How To Fix A Bathroom Tile

A loose or cracked bathroom tile can be an eyesore and a hazard. But don't worry, it's a relatively simple fix that you can do yourself with a few basic tools and materials.

Here are the steps on how to fix a bathroom tile:

1. Gather your tools and materials

You will need the following tools and materials to fix a bathroom tile:

A hammer or mallet
A chisel or flat-head screwdriver
A grout saw
A new tile of the same size and shape
Thin-set mortar
Grout
A sponge
A bucket
A trowel
A level

2. Remove the damaged tile

Use a hammer or mallet and a chisel or flat-head screwdriver to carefully remove the damaged tile. Be careful not to damage the surrounding tiles.

3. Clean the area

Once the damaged tile is removed, use a sponge and bucket to clean the area. Remove all of the old thin-set mortar and grout.

4. Apply thin-set mortar

Use a trowel to apply a thin layer of thin-set mortar to the area where the new tile will be placed. Be sure to spread the mortar evenly.

5. Set the new tile

Place the new tile in the area where the old tile was removed. Use a level to make sure that the tile is level.

6. Grout the tile

Use a grout float to apply grout to the joints between the tiles. Be sure to press the grout firmly into the joints.

7. Clean the tile

Once the grout has dried, use a sponge and bucket to clean the tile. Remove all of the excess grout.

8. Seal the grout

Once the tile is clean, apply a sealant to the grout. This will help to protect the grout from moisture and stains.

Tips

If the damaged tile is located in a wet area, be sure to let the thin-set mortar and grout dry completely before using the shower or bath.
If you are not comfortable fixing the tile yourself, you can hire a professional tile installer.