How To Fit Laminate Flooring In Bathroom

Laminate flooring is a popular choice for bathrooms because it is water-resistant, durable, and easy to clean. However, fitting laminate flooring in a bathroom can be a bit more challenging than fitting it in other rooms in the house, due to the presence of water and moisture.

In this article, we will provide you with a step-by-step guide on how to fit laminate flooring in a bathroom, including tips on how to prepare the subfloor, lay the laminate flooring, and seal the joints.

Step 1: Prepare the Subfloor

The first step is to prepare the subfloor. The subfloor must be level, smooth, and dry. If the subfloor is not level, you will need to level it using a self-leveling compound. If the subfloor is not smooth, you will need to sand it down until it is smooth.

Step 2: Lay Down an Underlayment

Once the subfloor is prepared, you need to lay down an underlayment. An underlayment will help to protect the laminate flooring from moisture and will also help to reduce noise.

Step 3: Lay the Laminate Flooring

Now you can start laying the laminate flooring. Start by laying the first row of laminate flooring along the longest wall in the bathroom. Make sure that the first row is straight, as this will determine the alignment of the rest of the flooring.

To lay the laminate flooring, simply click the planks together. Do not use any glue or nails, as this will damage the laminate flooring.

Step 4: Cut the Laminate Flooring

Once you have laid the first row of laminate flooring, you will need to cut the planks to fit around the obstacles in the bathroom, such as the toilet and the sink.

To cut the laminate flooring, you can use a jigsaw or a circular saw.

Step 5: Seal the Joints

Once the laminate flooring is installed, you need to seal the joints. This will help to prevent water from seeping into the laminate flooring and causing it to swell.

To seal the joints, you can use a silicone sealant. Apply the sealant to the joints using a caulk gun, and then smooth it out with your finger.

Step 6: Install the Trim

The final step is to install the trim. The trim will help to cover the edges of the laminate flooring and give the bathroom a finished look.

To install the trim, simply nail or glue it into place. Make sure to use a trim that is the same color as the laminate flooring.

Conclusion

Fitting laminate flooring in a bathroom can be a bit more challenging than fitting it in other rooms in the house, but it is still a relatively easy project that can be completed in a few hours.

By following the steps outlined in this article, you can ensure that your laminate flooring is installed correctly and will last for many years to come.