How To Change Bathroom Sink Stopper

How to Change Bathroom Sink Stopper

A slow-draining sink is a common plumbing problem that can be easily fixed by changing the sink stopper. The sink stopper is a small device that fits into the drain hole and prevents water from flowing out. Over time, the stopper can become clogged with hair, soap scum, and other debris, which can cause the sink to drain slowly or even stop draining altogether.

Changing the sink stopper is a relatively simple task that can be completed in a few minutes. Here are the steps on how to do it:

1. Gather your materials. You will need the following materials to change the sink stopper: - New sink stopper - Adjustable wrench - Plumber's putty (optional)

2. Turn off the water supply. The first step is to turn off the water supply to the sink. This will prevent water from leaking out when you remove the old stopper.

3. Remove the old stopper. Use the adjustable wrench to loosen the nut that holds the stopper in place. Once the nut is loose, you can pull the stopper out of the drain hole.

4. Clean the drain hole. Once the old stopper is removed, you should clean the drain hole. Remove any hair, soap scum, or other debris that may be clogging the drain.

5. Apply plumber's putty. If you are installing a new metal stopper, you may need to apply plumber's putty to the base of the stopper to create a watertight seal. Roll a small piece of plumber's putty into a thin rope and place it around the base of the stopper.

6. Insert the new stopper. Insert the new stopper into the drain hole. Make sure that the stopper is properly seated in the hole and that the plumber's putty (if used) is evenly distributed around the base of the stopper.

7. Tighten the nut. Use the adjustable wrench to tighten the nut that holds the stopper in place. Do not overtighten the nut, as this could damage the stopper or the sink.

8. Turn on the water supply. Once the stopper is installed, turn on the water supply and check for leaks. If there are any leaks, tighten the nut further until the leak stops.

Changing the sink stopper is a simple task that can be completed in a few minutes. By following these steps, you can keep your sink draining properly and avoid costly plumbing repairs.