How To Change Bathroom Sink Faucet

How to Change a Bathroom Sink Faucet

Replacing a bathroom sink faucet is a relatively straightforward task that can be completed in a few hours with a few basic tools. By following these step-by-step instructions, you can successfully change your bathroom sink faucet and enjoy a fresh, updated look.

Materials and Tools Required:

New bathroom sink faucet
Adjustable wrench
Phillips head screwdriver
Flathead screwdriver
Plumber's putty
Bucket

Step-by-Step Instructions:

1. Turn Off the Water Supply

Locate the water shut-off valves beneath the sink and close them to stop the water flow. If you cannot find the valves, turn off the main water supply to your house.

2. Disconnect the Old Faucet

Place a bucket beneath the sink to catch any dripping water. Using an adjustable wrench, loosen the nuts that connect the water supply lines to the old faucet. Then, disconnect the lift rod that connects the handle to the drain.

3. Remove the Faucet

Using a Phillips head screwdriver, unscrew the mounting nuts that hold the faucet to the sink. Carefully lift the faucet out of the sink.

4. Clean the Sink Surface

Wipe the surface where the faucet was mounted to remove any residue or old plumber's putty. This will ensure a good seal for the new faucet.

5. Install the New Faucet

Apply a thin layer of plumber's putty to the base of the new faucet. Position the faucet over the sink opening and carefully insert it into the mounting holes.

6. Secure the Faucet

Secure the faucet by tightening the mounting nuts using the Phillips head screwdriver. Make sure not to overtighten the nuts to prevent damage.

7. Connect the Water Supply Lines

Hand-tighten the nuts that connect the water supply lines to the new faucet. Use the adjustable wrench to snugly tighten the nuts. Ensure that the hot and cold lines are connected to the correct ports.

8. Reconnect the Lift Rod

Reattach the lift rod to the new faucet and tighten the screw using the flathead screwdriver.

9. Test the Faucet

Turn on the water supply and check for any leaks. If there are any leaks, tighten the nuts or connections until they stop.

Tips:

Before starting, take pictures of the old faucet and its connections for reference.
Use a helper to support the faucet while you tighten the nuts.
If you encounter any difficulties, do not hesitate to seek professional assistance.

Conclusion:

Changing a bathroom sink faucet is a simple yet effective way to update your bathroom. By following these step-by-step instructions and safety precautions, you can confidently tackle this task and enjoy a functional and stylish new faucet for years to come.