How To Change A Faucet In The Bathroom

How to Change a Faucet in the Bathroom

Replacing a bathroom faucet is a fairly simple plumbing task that most homeowners can tackle in a few hours. With the right tools and a little know-how, you can save yourself the cost of hiring a plumber. Here's a step-by-step guide on how to change a faucet in the bathroom:

Tools and Materials:

Adjustable wrench or basin wrench
Phillips head screwdriver
Flat head screwdriver
Plumber's putty or silicone sealant
New faucet

Step 1: Turn Off the Water Supply:

Locate the water supply valves under the sink. They are usually two small knobs or handles. Turn both valves clockwise to shut off the water supply.

Step 2: Disconnect the Water Supply Lines:

Using an adjustable wrench or basin wrench, loosen the nuts that connect the water supply lines to the faucet. Be careful not to overtighten or loosen the nuts.

Step 3: Remove the Old Faucet:

Use a Phillips head screwdriver to remove the screws that hold the faucet in place. Once the screws are removed, gently pull the faucet up and off the sink.

Step 4: Clean the Sink Surface:

Remove any old plumber's putty or silicone sealant from the sink surface where the new faucet will be installed.

Step 5: Apply Plumber's Putty:

Roll out a small piece of plumber's putty into a rope and place it around the base of the new faucet.

Step 6: Install the New Faucet:

Carefully align the new faucet with the holes in the sink and push it down until the putty forms a seal. Tighten the mounting nuts with a Phillips head screwdriver.

Step 7: Reconnect the Water Supply Lines:

Hand-tighten the nuts that connect the water supply lines to the faucet. Use an adjustable wrench or basin wrench to further tighten the nuts, but be careful not to overtighten.

Step 8: Turn On the Water Supply:

Slowly turn on both water supply valves under the sink. Check for leaks around the faucet and tighten any loose connections as needed.

Step 9: Test the Faucet:

Turn on the handles of the faucet and check for proper water flow and temperature control. If everything is working correctly, congratulations! You've successfully replaced your bathroom faucet.

Tips:

If you encounter any leaks, tighten the connections or apply more plumber's putty.
Use two wrenches to avoid twisting the water supply lines when tightening or loosening the nuts.
If you're not comfortable replacing the faucet yourself, don't hesitate to call a qualified plumber for assistance.