How Do You Remove A Bathroom Faucet

A leaky or broken bathroom faucet can be a major annoyance. If you're not comfortable fixing it yourself, you can call a plumber. However, if you're handy and have a few tools, you can save yourself some money by doing it yourself. Here's a step-by-step guide on how to remove a bathroom faucet:

Step 1: Gather Your Tools

Before you start, you'll need to gather a few tools:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Bucket or bowl
Rags

Step 2: Turn Off the Water Supply

The first step is to turn off the water supply to the faucet. There should be two shut-off valves under the sink. Turn both valves clockwise until they are fully closed.

Step 3: Open the Faucet

Once the water supply is turned off, open the faucet to release any remaining water in the lines.

Step 4: Disconnect the Supply Lines

Under the sink, you will see two supply lines connected to the faucet. Use the adjustable wrench to loosen the nuts that hold the supply lines in place. Be careful not to overtighten the nuts, as you could damage the lines.

Step 5: Remove the Mounting Nuts

Once the supply lines are disconnected, you need to remove the mounting nuts that hold the faucet in place. There will be two nuts, one on each side of the faucet. Use the adjustable wrench to loosen the nuts. Again, be careful not to overtighten the nuts.

Step 6: Lift the Faucet Out

Once the mounting nuts are removed, you can lift the faucet out of the sink. Be careful not to drop the faucet, as it could damage the sink or countertop.

Step 7: Clean the Sink and Faucet

Once the faucet is removed, take some time to clean the sink and faucet. Use a damp cloth to wipe down the sink and faucet, removing any dirt or debris. You can also use a mild cleaner to clean the faucet, if necessary.