How Do You Fix A Bathroom Sink Stopper

How to Fix a Bathroom Sink Stopper

Bathroom sink stoppers are a common source of plumbing problems. They can become stuck, leak, or simply stop working altogether. If you're experiencing any of these issues, don't despair! Fixing a bathroom sink stopper is a relatively easy task that can be completed in a few simple steps. ### Step 1: Determine the Type of Stopper There are two main types of bathroom sink stoppers: pop-up stoppers and lift-and-turn stoppers. Pop-up stoppers are the most common type, and they consist of a stopper that is attached to a rod that extends up through the sink drain. Lift-and-turn stoppers are less common, and they consist of a stopper that is attached to a lever that is located on the side of the sink. ### Step 2: Remove the Stopper Once you have determined the type of stopper that you have, you can begin to remove it. To remove a pop-up stopper, simply pull up on the rod that extends up through the drain. The stopper should come loose and pop out of the drain. To remove a lift-and-turn stopper, first lift the lever up to the open position. Then, turn the lever counterclockwise to unscrew the stopper from the drain. ### Step 3: Inspect the Stopper Once you have removed the stopper, inspect it for any damage. If the stopper is cracked or broken, it will need to be replaced. ### Step 4: Clean the Drain Once you have inspected the stopper, clean the drain. Use a brush or a pipe cleaner to remove any debris that may be clogging the drain. ### Step 5: Reinstall the Stopper To reinstall the stopper, simply insert it into the drain and push it down until it is in place. If you are installing a pop-up stopper, make sure that the rod is properly aligned with the drain. If you are installing a lift-and-turn stopper, turn the lever clockwise to tighten the stopper in place. ### Step 6: Test the Stopper Once you have reinstalled the stopper, test it to make sure that it is working properly. Turn on the water and allow it to run into the sink. The stopper should seal the drain and prevent the water from draining out. ### Step 7: Troubleshooting If the stopper is not working properly, there are a few things that you can do to troubleshoot the problem. *

Check the drain for debris.

Debris can clog the drain and prevent the stopper from sealing properly. Use a brush or a pipe cleaner to remove any debris that may be clogging the drain. *

Inspect the stopper for damage.

If the stopper is cracked or broken, it will need to be replaced. *

Make sure that the stopper is properly aligned.

If the stopper is not properly aligned, it will not seal the drain properly. Make sure that the stopper is centered in the drain and that the rod is properly aligned with the drain. *

Tighten the stopper.

If the stopper is loose, it will not seal the drain properly. Tighten the stopper by turning the lever clockwise. If you have followed all of these steps and the stopper is still not working properly, you may need to call a plumber.