Fixing The Stopper In A Bathroom Sink

Fixing the Stopper in a Bathroom Sink

A bathroom sink stopper is a small but essential part of the sink that helps to keep water in the basin. When the stopper is not working properly, it can be a major inconvenience. Fortunately, fixing a bathroom sink stopper is a relatively simple task that can be completed in just a few minutes.

There are two main types of bathroom sink stoppers: pop-up stoppers and lift-and-turn stoppers. Pop-up stoppers are the most common type of stopper, and they are typically made of rubber or plastic. Lift-and-turn stoppers are less common, and they are typically made of metal. Both types of stoppers work by creating a seal around the drain hole, which prevents water from escaping.

If your bathroom sink stopper is not working properly, the first step is to determine what type of stopper you have. Once you know what type of stopper you have, you can follow the steps below to fix it.

Fixing a Pop-Up Stopper

Pop-up stoppers are the most common type of bathroom sink stopper, and they are typically made of rubber or plastic. They work by creating a seal around the drain hole when the stopper is pushed down. If your pop-up stopper is not working properly, it is likely because the seal is damaged or the stopper is stuck.

To fix a pop-up stopper, follow these steps:

Remove the stopper from the sink. To do this, simply pull up on the stopper until it comes loose.
Inspect the stopper for damage. If the stopper is damaged, it will need to be replaced.
If the stopper is not damaged, clean the stopper and the drain hole with a mild detergent. Rinse the stopper and the drain hole thoroughly with water.
Reinstall the stopper in the sink. To do this, simply push the stopper down into the drain hole until it is seated properly.

Fixing a Lift-and-Turn Stopper

Lift-and-turn stoppers are less common than pop-up stoppers, and they are typically made of metal. They work by creating a seal around the drain hole when the stopper is lifted and turned. If your lift-and-turn stopper is not working properly, it is likely because the seal is damaged or the stopper is stuck.

To fix a lift-and-turn stopper, follow these steps:

Remove the stopper from the sink. To do this, simply lift the stopper up and turn it counterclockwise until it comes loose.
Inspect the stopper for damage. If the stopper is damaged, it will need to be replaced.
If the stopper is not damaged, clean the stopper and the drain hole with a mild detergent. Rinse the stopper and the drain hole thoroughly with water.
Reinstall the stopper in the sink. To do this, simply lift the stopper up and turn it clockwise until it is seated properly.

Once you have fixed your bathroom sink stopper, it is important to test it to make sure that it is working properly. To test the stopper, simply fill the sink with water and then push down on the stopper (for pop-up stoppers) or lift and turn the stopper (for lift-and-turn stoppers). If the water stays in the sink, then the stopper is working properly.