Fixing A Delta Bathroom Faucet Leak

A leaky faucet is a common household problem that can waste a lot of water and increase your water bill. If you have a Delta bathroom faucet that is leaking, there are a few things you can do to fix it yourself. Here is a step-by-step guide on how to fix a Delta bathroom faucet leak:

1. Gather your tools

You will need the following tools to fix a Delta bathroom faucet leak:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Allen wrench (if necessary)
Replacement parts (if necessary)

2. Turn off the water supply

The first step is to turn off the water supply to the faucet. There are usually two shutoff valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water supply.

3. Remove the handle

Once the water supply is turned off, you can remove the handle. Most Delta bathroom faucets have a small set screw on the side of the handle. Use a Phillips head screwdriver to remove the set screw, then pull the handle straight up to remove it.

4. Remove the cartridge

Once the handle is removed, you will see the cartridge. The cartridge is a cylindrical-shaped piece that contains the seals that prevent water from leaking. To remove the cartridge, use a flat head screwdriver to pry it out of the faucet body.

5. Inspect the cartridge

Once the cartridge is removed, inspect it for any damage. If the seals are worn or damaged, they will need to be replaced. You can purchase replacement seals at most hardware stores.

6. Reassemble the faucet

Once you have replaced the seals, reassemble the faucet in reverse order. First, insert the cartridge into the faucet body. Then, replace the handle and tighten the set screw. Finally, turn on the water supply and check for leaks.

7. Call a plumber

If you are unable to fix the leak yourself, you can call a plumber to do it for you. A plumber will have the tools and experience necessary to fix any type of faucet leak.