Drop In Bathroom Sink Replacement

A drop-in bathroom sink is a type of sink that is installed by dropping it into an existing countertop opening. It is a popular choice for bathroom remodels because it is relatively easy to install and can be done in a few hours. Drop-in sinks are also available in a variety of materials and styles, so you can find one that will complement your bathroom décor.

If you are considering replacing your bathroom sink, a drop-in sink is a great option. Here is a step-by-step guide on how to replace a drop-in bathroom sink:

Step 1: Gather your materials

New drop-in bathroom sink
Caulk gun
Caulk
Putty knife
Wrench
Pliers
Basin wrench

Step 2: Remove the old sink

Begin by turning off the water supply to the sink. Next, disconnect the water lines from the sink. Use a wrench to loosen the nuts on the water lines and then remove the lines by hand. Once the water lines are disconnected, you can use a putty knife to break the seal between the sink and the countertop. Be careful not to damage the countertop.

Step 3: Clean the countertop

Once the old sink is removed, you will need to clean the countertop. Use a cleaner that is specifically designed for the type of countertop you have. Be sure to remove all of the old caulk and debris from the countertop.

Step 4: Apply caulk to the countertop

Apply a bead of caulk to the underside of the new sink. Be sure to apply the caulk evenly and completely around the edge of the sink. The caulk will help to seal the sink to the countertop and prevent water damage.

Step 5: Drop the sink into place

Carefully lift the new sink and drop it into place on the countertop. Be sure to center the sink and align it with the drain hole. Once the sink is in place, press down on it firmly to make sure it is secure.

Step 6: Reconnect the water lines

Reconnect the water lines to the sink. Be sure to tighten the nuts on the water lines securely. Once the water lines are reconnected, turn on the water supply and check for leaks.

Step 7: Seal the sink to the countertop

Apply a bead of caulk around the edge of the sink where it meets the countertop. Be sure to apply the caulk evenly and completely around the edge of the sink. The caulk will help to seal the sink to the countertop and prevent water damage.