Bathroom Ventilation Fan Motor Replacement
Bathroom ventilation fans are essential for removing moisture and odors from the air, helping to prevent mold and mildew growth. However, over time, the motor in the fan can wear out, causing the fan to stop working or become noisy. Replacing the motor is a relatively simple task that can be completed in a few hours.
Tools and Materials Needed
- New bathroom ventilation fan motor
- Phillips head screwdriver
- Electrical tape
- Wire strippers
- Multimeter (optional)
Safety Precautions
Before starting any work, make sure the power to the fan is turned off at the circuit breaker or fuse box. Also, wear safety glasses and gloves to protect yourself from electrical shock and sharp edges.
Step-by-Step Instructions
- Remove the Fan Cover
Most bathroom ventilation fans have a removable cover that is held in place by screws. Remove the screws and set the cover aside.
- Disconnect the Electrical Wires
Using a screwdriver, disconnect the electrical wires from the motor. Note which wire was connected to which terminal on the motor.
- Remove the Motor
Depending on the type of fan, you may need to remove a few additional screws to release the motor from the housing. Carefully pull the motor out of the housing.
- Test the New Motor (Optional)
Before installing the new motor, you can test it to make sure it is working properly. Connect the wires to the appropriate terminals on the motor and plug the fan into an outlet. If the motor runs smoothly and quietly, it is good to install.
- Install the New Motor
Insert the new motor into the housing and secure it with the screws. Make sure the wires are not pinched or damaged.
- Connect the Electrical Wires
Reconnect the electrical wires to the motor, making sure to match the wires to the correct terminals. Secure the connections with electrical tape.
- Install the Fan Cover
Replace the fan cover and secure it with the screws. Make sure the fan cover is properly sealed to prevent air leaks.
Troubleshooting
If the fan does not work after replacing the motor, there may be a problem with the electrical connection or the wiring. Check the connections to make sure they are secure and that the wires are not damaged. You can also use a multimeter to test the voltage at the motor terminals.
Conclusion
Replacing a bathroom ventilation fan motor is a relatively simple task that can be completed in a few hours. By following these instructions, you can save money and keep your bathroom fan working efficiently.
3 Exhaust Fan Motor Bathroom Kitchen Vent Fits Emerson Pryne Nutone Air King Newit
Broan Nutone Replacement Motor And Impeller For 659 678 Bathroom Exhaust Fans S97012038 The Home
Universal Security Instruments Bf 70ma Motor Assembly Replacement Part For 70 Cfm Bathroom Fans
Broan Metal Replacement Bath Fan Motor In The Bathroom Parts Department At Com
Universal Security Instruments Bf 50ma Motor Assembly Replacement Part For 50 Cfm Bathroom Fans
Universal Bathroom Vent Fan Motor Replacement Electric Motors Kit Compatible With Nutone Broan 50cfm 120v Com
Bathroom Vent Exhaust Fan Motor Replacement Electric Motors Kit For Nutone Broan 50cfm 120v Replace C01575 65100 Em550 Em750 Newegg Com
Broan Nutone Quickit 60 Cfm 2 5 Sones 10 Minute Bathroom Exhaust Fan Upgrade Kit Qkn60s The Home
Broan Nutone Part S99080180 Fan Motor For Models 509 509s Exhaust Motors Parts Home Pro
Broan Nutone Part S97009745 Exhaust Fan Blower Assembly For Hd80 684 A B C 684f 708 Motors Parts Home Pro
See Also
