Bathroom Light Fixture Replacement Glass

Replacing the glass on a bathroom light fixture is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily update the look of your bathroom without spending a lot of money.

Tools and Materials

Replacement glass
Screwdriver
Putty knife
Caulk gun
Caulk

Instructions

Turn off the power to the light fixture at the circuit breaker or fuse box.
Remove the old glass. Use a screwdriver to remove the screws that hold the glass in place, then carefully lift the glass out of the fixture.
Clean the fixture. Use a putty knife to remove any old caulk or adhesive from the fixture. Then, wipe the fixture clean with a damp cloth.
Apply caulk. Run a bead of caulk around the edge of the fixture where the glass will sit. This will help to seal the glass in place and prevent water from getting into the fixture.
Insert the new glass. Carefully place the new glass into the fixture, making sure that it is properly aligned. Press the glass firmly into place so that it makes contact with the caulk.
Screw in the screws. Replace the screws that hold the glass in place. Tighten the screws until they are snug, but do not overtighten them.
Turn on the power to the light fixture and test it to make sure that it is working properly.

Tips

When choosing replacement glass, be sure to select a size and shape that is compatible with your light fixture. You can find replacement glass at most hardware stores or home improvement centers.
If you are not comfortable replacing the glass yourself, you can hire a qualified electrician to do the job for you.
To prevent the glass from breaking, be sure to handle it with care. Wear gloves when handling the glass, and do not drop it or hit it against anything hard.

By following these steps, you can easily replace the glass on a bathroom light fixture. This is a simple task that can update the look of your bathroom without spending a lot of money.