How To Repair A Bathroom Faucet

A leaky faucet is a common household problem that can waste water and increase your water bill. If you're handy, you can save money by repairing the faucet yourself. Here's a step-by-step guide on how to repair a bathroom faucet.

Tools and Materials You'll Need

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Allen wrench (if necessary)
Replacement faucet parts (if necessary)
Plumber's tape
Towels or rags

Safety First

Before you begin, turn off the water supply to the faucet. You can do this by turning off the valves under the sink or by turning off the main water supply to your home. Once the water is turned off, open the faucet to release any remaining water.

Step 1: Remove the Aerator

The aerator is the small screen that screws onto the end of the faucet. It helps to create a more even flow of water and to reduce splashing. To remove the aerator, unscrew it by hand or with a wrench. If the aerator is stuck, you can use a pair of pliers to loosen it.

Step 2: Remove the Handle

The handle is held in place by a screw. Locate the screw and remove it with a screwdriver. Once the screw is removed, you can pull the handle off the faucet.

Step 3: Remove the Cartridge or Stem

The cartridge or stem is the part of the faucet that controls the flow of water. To remove the cartridge or stem, you will need to use an adjustable wrench. Place the wrench on the base of the cartridge or stem and turn it counterclockwise to loosen it. Once the cartridge or stem is loose, you can pull it out of the faucet.

Step 4: Inspect the Cartridge or Stem

Once you have removed the cartridge or stem, inspect it for damage. If the cartridge or stem is damaged, you will need to replace it.

Step 5: Reassemble the Faucet

To reassemble the faucet, simply reverse the steps you took to disassemble it. First, insert the new cartridge or stem into the faucet. Then, tighten the cartridge or stem into place with an adjustable wrench. Next, replace the handle and tighten the screw. Finally, screw on the aerator.

Step 6: Turn on the Water Supply

Once the faucet is reassembled, turn on the water supply and check for leaks. If there are any leaks, tighten the connections until the leaks stop.

Tips

If you are not comfortable repairing the faucet yourself, you can call a plumber.
Before you start repairing the faucet, make sure you have all of the necessary tools and materials.
Be patient and take your time. Repairing a faucet can be a bit tricky, but it is definitely possible to do it yourself.