Bathroom Exhaust Fan Light Replacement

Bathroom exhaust fans are an important part of any home, as they help to remove moisture and odors from the air. They also help to prevent mold and mildew growth, which can be harmful to your health. If your bathroom exhaust fan light is not working properly, it is important to replace it as soon as possible. Here is a step-by-step guide on how to do it:

Step 1: Gather Your Tools and Materials

You will need the following tools and materials to replace your bathroom exhaust fan light:

New bathroom exhaust fan light
Screwdriver
Wire strippers
Electrical tape
Safety glasses
Dust mask

Step 2: Safety First

Before you begin working on your bathroom exhaust fan light, it is important to take some safety precautions. Make sure to wear safety glasses and a dust mask to protect yourself from dust and debris. Also, turn off the power to the bathroom exhaust fan light at the circuit breaker panel.

Step 3: Remove the Old Exhaust Fan Light

Once you have gathered your tools and materials and taken safety precautions, you can begin removing the old exhaust fan light. First, remove the cover plate from the exhaust fan light. Then, use a screwdriver to remove the screws that hold the exhaust fan light in place. Once the screws are removed, you can carefully pull the exhaust fan light out of the ceiling.

Step 4: Disconnect the Electrical Wires

Once you have removed the old exhaust fan light, you will need to disconnect the electrical wires. Use a wire stripper to remove about 1/2 inch of insulation from the ends of the electrical wires. Then, twist the exposed wires together and secure them with electrical tape.

Step 5: Install the New Exhaust Fan Light

Now you are ready to install the new exhaust fan light. First, feed the electrical wires through the hole in the ceiling. Then, position the exhaust fan light in the hole and secure it with the screws that came with the new exhaust fan light.

Step 6: Reconnect the Electrical Wires

Next, you will need to reconnect the electrical wires. Twist the exposed wires from the new exhaust fan light together with the exposed wires from the ceiling. Then, secure the wires with electrical tape.

Step 7: Replace the Cover Plate

Finally, you can replace the cover plate on the exhaust fan light. Make sure that the cover plate is securely in place.

Step 8: Turn on the Power and Test the Exhaust Fan Light

Once you have replaced the cover plate, you can turn on the power to the bathroom exhaust fan light at the circuit breaker panel. Then, test the exhaust fan light to make sure that it is working properly.

Congratulations

You have now successfully replaced your bathroom exhaust fan light. If you have any questions or concerns, please consult with a qualified electrician.