How To Remove Bathroom Tub Drain

Removing a bathroom tub drain is a straightforward task that can be completed in a few minutes with the right tools. Here's a step-by-step guide to help you get started:

Step 1: Gather the Necessary Tools

Before you begin, gather the following tools:

Adjustable wrench
Bucket or bowl
Plunger or drain snake
Flashlight (optional)
Gloves (optional)

Step 2: Remove the Drain Stopper

If your tub has a drain stopper, remove it by lifting it straight up. If the stopper is stuck, use a wrench or pliers to gently pry it loose.

Step 3: Place a Bucket or Bowl Underneath the Drain

Place a bucket or bowl underneath the drain to catch any water or debris that may come out when you remove the drain.

Step 4: Loosen the Drain Nut

Using an adjustable wrench, loosen the drain nut that is located directly underneath the drain opening. Turn the nut counterclockwise to loosen it.

Step 5: Pull Out the Drain Assembly

Once the drain nut is loose, pull out the drain assembly. It may be necessary to use a plunger or drain snake to help loosen the assembly.

Step 6: Inspect the Drain Assembly

Inspect the drain assembly for any clogs or damage. If you find any clogs, use a drain snake or a pair of pliers to remove them.

Step 7: Reinstall the Drain Assembly

Insert the drain assembly back into the drain hole and tighten the drain nut using an adjustable wrench. Turn the nut clockwise to tighten it. Make sure the drain assembly is securely in place before using the tub.

Step 8: Test the Drain

Turn on the water and check if the drain is working properly. If there are any leaks or drips, tighten the drain nut further.

Additional Tips

Wear gloves to protect your hands from any chemicals or debris.
Use a flashlight to help you see inside the drain if necessary.
If you encounter any difficulties, do not hesitate to call a plumber for assistance.