How To Install New Faucet In Bathroom Sink

Replacing a bathroom sink faucet is a relatively simple plumbing project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber.

Before you begin, gather the following tools and materials:

New faucet
Adjustable wrench
Pliers
Screwdriver
Plumber's putty
Teflon tape
Bucket
Rags

Once you have all of your tools and materials, follow these steps to install your new faucet:

1. Turn off the water supply to the sink.

There are usually two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to turn off the water. If there are no shut-off valves, you will need to turn off the main water supply to your home.

2. Disconnect the old faucet.

Use an adjustable wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can remove the faucet from the sink.

3. Clean the sink surface.

Use a rag and some cleaner to clean the surface of the sink where the new faucet will be installed. This will help to ensure a good seal.

4. Apply plumber's putty.

Roll out a rope of plumber's putty and place it around the base of the new faucet. The putty will help to seal the faucet and prevent water from leaking.

5. Install the new faucet.

Insert the new faucet into the sink and tighten the nuts that hold it in place. Do not overtighten the nuts, as this could damage the faucet.

6. Connect the water supply lines.

Use pliers to connect the water supply lines to the new faucet. Make sure that the hot water line is connected to the hot water inlet on the faucet, and the cold water line is connected to the cold water inlet on the faucet.

7. Turn on the water supply and check for leaks.

Slowly turn on the water supply and check for leaks. If there are any leaks, tighten the nuts that hold the faucet in place or the connections on the water supply lines.

8. Install the handles.

Install the handles on the faucet and tighten the screws that hold them in place.

Your new faucet is now installed and ready to use. Enjoy your new bathroom sink!