How To Replace Bathroom Floor Tile

How to Replace Bathroom Floor Tile

Replacing bathroom floor tile is a great way to update the look of your bathroom, and it's a project that you can do yourself with a little bit of planning and effort. While not particularly complex, it is physically demanding so be prepared to get down on your hands and knees for extended periods.

Before you start, you'll need to gather your materials. You'll need new tile, grout, thinset mortar, a notched trowel, a grout float, a bucket, a sponge, a utility knife, and a hammer. You may also want to rent a tile saw if you don't have one.

Once you have your materials, you can start by removing the old tile. Use a utility knife to score the grout around the edges of the tile, then use a hammer to break the tile into pieces. Be careful not to damage the subfloor when you're removing the tile. Put on knee pads as this step requires getting on your hands and knees.

After you've removed the old tile, you'll need to prepare the subfloor for the new tile. Make sure the subfloor is clean and level. If the subfloor is not level, you'll need to use a self-leveling compound to smooth it out.

Once the subfloor is prepared, you can start laying the new tile. Use a notched trowel to apply thinset mortar to the subfloor. Then, press the tile into the mortar. Use a grout float to press the grout into the joints between the tiles.

Allow the grout to dry for 24 hours. Once the grout is dry, you can seal the tile and grout. This will help to protect the tile and grout from stains and damage.

Replacing bathroom floor tile is a rewarding project that can make a big difference in the look of your bathroom. With a little bit of planning and effort, you can do it yourself and save money on the cost of professional installation.

Tips for Replacing Bathroom Floor Tile

Use a tile saw to cut the tile. This will give you a clean, straight cut.
Make sure the subfloor is clean and level before you start laying the tile.
Use a notched trowel to apply thinset mortar to the subfloor. This will help to ensure that the tile is securely bonded to the subfloor.
Press the tile into the mortar firmly. Use a grout float to press the grout into the joints between the tiles.
Allow the grout to dry for 24 hours before you seal the tile and grout.