How To Change A Bathroom Faucet And Drain

Changing a bathroom faucet and drain is a relatively simple task that can be completed in a few hours, even if you have minimal plumbing experience. Here's a step-by-step guide to help you get the job done:

Step 1: Gather Your Tools and Materials

You will need the following tools and materials:

New faucet and drain
Wrench
Pliers
Adjustable wrench
Plumber's putty
Teflon tape
Basin wrench (optional)

Step 2: Turn Off the Water Supply

Before you start, turn off the water supply to the bathroom. This is usually done by turning off the shutoff valves located under the sink.

Step 3: Disconnect the Old Drain

Use a wrench or pliers to loosen the nuts that hold the old drain in place. Once the nuts are loose, you can remove the drain by pulling it straight up.

Step 4: Remove the Old Faucet

If your faucet has a single handle, you can remove the handle by pulling it straight up. If your faucet has two handles, you will need to remove the screws that hold the handles in place. Once the handles are removed, you can use a wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can remove the faucet by pulling it straight up.

Step 5: Install the New Drain

Apply a bead of plumber's putty to the base of the new drain. Then, insert the drain into the sinkhole and tighten the nuts until they are snug. Be careful not to overtighten the nuts, as this can damage the sink.

Step 6: Install the New Faucet

Apply a few wraps of Teflon tape to the threads of the new faucet. Then, insert the faucet into the sinkhole and tighten the nuts until they are snug. Again, be careful not to overtighten the nuts.

Step 7: Connect the Water Supply

Turn on the water supply to the bathroom and check for leaks. If there are any leaks, tighten the nuts on the faucet and drain until the leaks stop.

Step 8: Finish Up

Turn on the faucet and check for proper operation. If the faucet is working properly, you are finished.

Changing a bathroom faucet and drain is a relatively simple task that can be completed in a short amount of time. By following these steps, you can save yourself the cost of hiring a plumber.