How To Change Faucet Bathroom

The bathroom faucet is one of the most used fixtures in your home, so it's important to keep it in good working condition. If your faucet is leaking, dripping, or otherwise not working properly, it's time to replace it. Replacing a bathroom faucet is a relatively simple DIY project that can be completed in a few hours.

Tools and Materials You'll Need

New bathroom faucet
Adjustable wrench
Plumber's putty
Teflon tape
Bucket
Rags

Safety First

Before you start, turn off the water supply to your bathroom sink. You can do this by turning off the valves under the sink or by turning off the main water supply to your home. Once the water is off, open the faucet to release any remaining water.

Step-by-Step Instructions

Remove the old faucet. Start by disconnecting the water supply lines from the faucet. Use an adjustable wrench to loosen the nuts that hold the lines in place. Once the lines are disconnected, you can remove the old faucet by unscrewing the mounting nuts.
Clean the sink surface. Once the old faucet is removed, clean the sink surface around the faucet holes. Remove any old plumber's putty or Teflon tape.
Apply plumber's putty. Roll out a rope of plumber's putty and place it around the base of the new faucet. The putty will help to seal the faucet and prevent leaks.
Install the new faucet. Insert the new faucet into the faucet holes in the sink. Tighten the mounting nuts until the faucet is secure. Be careful not to overtighten the nuts.
Connect the water supply lines. Reconnect the water supply lines to the faucet. Use an adjustable wrench to tighten the nuts that hold the lines in place.
Turn on the water supply. Turn on the water supply to your bathroom sink. Check for leaks around the faucet. If you find any leaks, tighten the mounting nuts or water supply lines until the leaks stop.

Tips

If you're not comfortable replacing a faucet yourself, you can hire a plumber to do it for you.
When choosing a new faucet, be sure to select one that is compatible with your sink.
If your faucet is leaking from the base, it may be necessary to replace the O-rings.
If your faucet is dripping from the spout, it may be necessary to replace the cartridge.

Conclusion

Replacing a bathroom faucet is a relatively simple DIY project that can be completed in a few hours. By following these step-by-step instructions, you can save yourself the cost of hiring a plumber.