Pop Up Stopper For Bathroom Sink

Pop-Up Stopper for Bathroom Sink

Fixing a leaky or faulty pop-up stopper in a bathroom sink is a relatively simple task that can be completed in a few minutes with a few tools. Here's a comprehensive guide to help you through the process:

Materials You'll Need:

Adjustable wrench
Phillips head screwdriver
Needle-nose pliers (optional)
Replacement pop-up stopper (if necessary)

Step-by-Step Instructions:

1. Turn Off the Water Supply:

Begin by turning off the water supply to the sink. Locate the shut-off valves beneath the sink and turn them clockwise until the water stops flowing.

2. Remove the Sink Stopper:

Use the adjustable wrench to loosen the nut that holds the pop-up stopper assembly in place. Grip the stopper from the top and pull it straight up to disengage it from the sink.

3. Inspect the Stopper Assembly:

Inspect the stopper assembly for any signs of damage or wear. If the stopper is cracked or damaged, it will need to be replaced. If it appears intact, proceed to the next step.

4. Remove the Lift Rod:

Locate the lift rod attached to the stopper assembly. Use the Phillips head screwdriver to remove the screw that secures the rod to the stopper.

5. Clean the Stopper Assembly:

Use a damp cloth to clean the stopper assembly, removing any debris or buildup. If necessary, use needle-nose pliers to remove any hair or other small objects that may be stuck in the mechanism.

6. Reassemble the Stopper:

Reinsert the lift rod into the stopper assembly. Align the hole in the rod with the hole in the stopper and secure it with the screw.

7. Install the Stopper Assembly:

Place the stopper assembly back into the sink drain hole. Align the nut with the threads on the drain hole and hand-tighten it as much as possible.

8. Tighten the Stopper Assembly:

Use the adjustable wrench to further tighten the nut, applying firm but not excessive pressure.

9. Test the Stopper:

Turn on the water supply and allow water to fill the sink. Press the stopper down and release it to verify that it is functioning properly and that there are no leaks.

10. Make Minor Adjustments:

If the stopper is not closing completely or is difficult to open, you may need to make some minor adjustments. Use the adjustable wrench to loosen or tighten the nut slightly until the stopper operates smoothly.

Additional Tips:

If the pop-up stopper is not repairable, it is relatively inexpensive to purchase and install a replacement.
To prevent future problems, clean the stopper assembly regularly to remove any debris or buildup.
If you encounter any difficulties, consult with a professional plumber for assistance.