How To Remove Bathroom Tub Faucet

How to Remove a Bathroom Tub Faucet

Removing a bathroom tub faucet may seem like a daunting task, but with the right tools and a little know-how, it can be done in a matter of minutes. Here is a step-by-step guide on how to remove a bathroom tub faucet:

Tools and Materials

Adjustable wrench
Allen wrench
Plumber's putty
Bucket
Rags or towels
New faucet (optional)

Step 1: Turn Off the Water Supply

Before you begin working on the faucet, it is important to turn off the water supply to the bathroom. There should be two shut-off valves located under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to shut off the water supply.

Step 2: Open the Faucet

Open the faucet to release any remaining water in the lines. This will help prevent water from leaking out when you remove the faucet.

Step 3: Remove the Aerator

The aerator is the small screen attached to the end of the faucet spout. Use an adjustable wrench or Allen wrench to unscrew the aerator.

Step 4: Remove the Escutcheon Plate

The escutcheon plate is the decorative cover that surrounds the faucet base. Use an adjustable wrench to loosen the nut that holds the escutcheon plate in place. Once the nut is loose, you can remove the escutcheon plate.

Step 5: Remove the Locknut

Underneath the escutcheon plate is a locknut that holds the faucet in place. Use an adjustable wrench to loosen the locknut. Once the locknut is loose, you can remove the faucet.

Step 6: Remove the Supply Lines

The supply lines are the flexible hoses that connect the faucet to the water supply valves. Use an adjustable wrench to loosen the nuts that hold the supply lines in place. Once the nuts are loose, you can disconnect the supply lines.

Step 7: Remove the Faucet

Once the supply lines are disconnected, you can remove the faucet. Pull the faucet straight up to detach it from the mounting surface.

Step 8: Install the New Faucet (Optional)

If you are replacing the faucet, follow the manufacturer's instructions to install the new faucet. Be sure to apply plumber's putty to the base of the faucet to create a watertight seal.

Step 9: Reconnect the Supply Lines

Reconnect the supply lines to the new faucet. Tighten the nuts on the supply lines until they are snug.

Step 10: Reinstall the Escutcheon Plate

Reinstall the escutcheon plate over the faucet base. Tighten the nut that holds the escutcheon plate in place.

Step 11: Reinstall the Aerator

Reinstall the aerator onto the end of the faucet spout. Tighten the aerator until it is snug.

Step 12: Turn on the Water Supply

Turn on the shut-off valves under the sink to restore the water supply to the bathroom. Check for leaks around the faucet base and supply lines.

Step 13: Enjoy Your New Faucet!

Congratulations! You have successfully removed your bathroom tub faucet. Enjoy your new faucet and the satisfaction of completing this plumbing project on your own.