How To Unscrew Bathroom Drain

A clogged bathroom drain is a common plumbing problem that can be easily fixed with a few simple tools. If you're experiencing slow drainage or water backup in your sink or tub, the first step is to try and unclog the drain using a plunger or drain snake. If these methods don't work, you may need to remove the drain stopper and clean out the clog. Here's a step-by-step guide on how to unscrew a bathroom drain:

Tools you will need:

Adjustable wrench
Phillips head screwdriver
Bucket
Old toothbrush or rag

Step-by-Step Instructions:

Turn off the water supply to the sink or tub. This is usually done by turning off the valves under the sink or behind the toilet.
Place a bucket under the drain to catch any water that may leak out.
Use an adjustable wrench to loosen the drain stopper. Turn the wrench counterclockwise to loosen the stopper.
Once the stopper is loose, remove it by hand. If the stopper is difficult to remove, you can use a Phillips head screwdriver to pry it out.
Clean the drain stopper and the drain opening. Use an old toothbrush or rag to remove any hair, soap scum, or other debris that may be clogging the drain.
Reinstall the drain stopper. Screw the stopper back into place by hand, then tighten it with the adjustable wrench.
Turn on the water supply and check for leaks. If there are any leaks, tighten the drain stopper further.

Tips:

If you're having trouble loosening the drain stopper, you can try using penetrating oil to help break it loose.
Be careful not to overtighten the drain stopper, as this can damage the drain.
If you're still having problems unclogging the drain, you may need to call a plumber.

Conclusion:

Unscrewing a bathroom drain is a relatively simple task that can be completed in a few minutes. By following these steps, you can easily unclog your drain and get your sink or tub draining properly again.