How To Remove Bathroom Tile On Wall

Removing bathroom tile on walls can be a big job, but it's one that can be done by most DIYers with the right tools and a little bit of patience. Here are the steps you need to follow:

Safety first. Before you start, make sure to turn off the water supply to your bathroom and put on safety glasses and gloves.
Remove any fixtures. This includes things like towel racks, soap dishes, and toilet paper holders. Once the fixtures are removed, you can start removing the tile.
Score the grout. Use a utility knife to score the grout lines between the tiles. This will make it easier to remove the tiles without damaging them.
Pry up the tiles. Use a flat pry bar to pry up the tiles, starting from the bottom and working your way up. Be careful not to damage the wall behind the tiles.
Clean the wall. Once all of the tiles have been removed, use a damp sponge to clean the wall. This will remove any leftover grout or adhesive.
Repair any damage. If you damaged the wall while removing the tiles, you'll need to repair it before you can install new tile. This may involve patching holes or replacing damaged drywall.
Install new tile. Once the wall is repaired, you can start installing new tile. Follow the manufacturer's instructions for installing the tile.

Here are some additional tips for removing bathroom tile on walls:

If the tile is particularly difficult to remove, you can use a heat gun to soften the adhesive. Be careful not to overheat the tile, as this could damage it.
If you're removing a large amount of tile, you may want to rent a tile saw. This will make the job go much faster.
Be sure to wear a dust mask when removing tile. This will help to protect your lungs from the dust that is created.

Removing bathroom tile on walls can be a big job, but it's one that is well within the reach of most DIYers. By following these steps, you can save yourself a lot of money and get the bathroom of your dreams.