How To Replace Bathroom Sink Stopper

Replacing a bathroom sink stopper is a simple task that can be completed in a few minutes. By following these step-by-step instructions, you can easily replace your old sink stopper with a new one.

Materials You'll Need

New bathroom sink stopper
Adjustable wrench
Plumber's putty (optional)
Rags or paper towels

Step-by-Step Instructions

1. Turn off the water supply to your sink. This is usually done by turning off the angle stop valves located under the sink. If you do not have angle stop valves, you will need to turn off the main water supply to your home. 2. Remove the old sink stopper. Using an adjustable wrench, loosen the nut that holds the stopper in place. Once the nut is loose, you can remove the stopper by hand. 3. Clean the sink drain. Use a rag or paper towels to clean the sink drain of any debris. This will help to prevent the new sink stopper from leaking. 4. Apply plumber's putty to the new sink stopper (optional). Plumber's putty is a type of sealant that can be used to help prevent leaks. To apply plumber's putty, simply roll it into a rope and place it around the base of the new sink stopper. 5. Insert the new sink stopper into the drain. Align the new sink stopper with the drain and push it into place. 6. Tighten the nut that holds the sink stopper in place. Use an adjustable wrench to tighten the nut until it is snug. Do not overtighten the nut, as this could damage the sink stopper or the drain. 7. Turn on the water supply to your sink. Check for leaks around the sink stopper. If you see any leaks, tighten the nut further. 8. Test the sink stopper. Plug the sink and fill it with water. The sink stopper should effectively prevent the water from draining out.

Tips

If you are replacing a sink stopper with a different type of stopper, you may need to purchase a new drain assembly.
If you are having difficulty removing the old sink stopper, you can try using a pair of pliers.
Be careful not to overtighten the nut that holds the sink stopper in place, as this could damage the sink stopper or the drain.
If you have any questions about replacing a bathroom sink stopper, you can consult a qualified plumber.