How To Fix A Dripping Faucet Bathroom

When the faucet has a tiny leak, you can hear a “drip…drip…drip” sound in the bathroom. Initially, it may not feel like a major problem, but over time it can waste a lot of water and increase your water bill. A dripping faucet is a common plumbing problem that can be fixed with a few simple tools and a little bit of time.

Tools and Materials:

* Adjustable wrench * Philips head screwdriver * Flat head screwdriver * Replacement washer (if needed) * Plumber's putty

Steps:

Turn off the water supply:

The first step is to turn off the water supply to the faucet. There will be two shut-off valves under the sink, one for hot water and one for cold water. Turn both valves clockwise to turn off the water. 2.

Open the faucet:

Once the water supply is turned off, open the faucet to release any remaining water in the line. 3.

Remove the aerator:

The aerator is the small screen attached to the end of the faucet spout. It helps to create a smooth stream of water and can become clogged with mineral deposits over time. To remove the aerator, simply unscrew it by hand or use a wrench if it is stuck. 4.

Remove the handle:

The handle is held in place by a screw. Use a screwdriver to remove the screw and then pull the handle straight up to remove it. 5.

Remove the cartridge:

The cartridge is the part of the faucet that controls the flow of water. To remove the cartridge, use an adjustable wrench to loosen the nut that holds it in place. Once the nut is loose, you can pull the cartridge straight up to remove it. 6.

Inspect the cartridge:

Once the cartridge is removed, inspect it for any damage or wear. If the cartridge is damaged, it will need to be replaced. 7.

Replace the cartridge:

If the cartridge needs to be replaced, insert the new cartridge into the faucet body and tighten the nut to hold it in place. 8.

Reassemble the faucet:

Once the cartridge is replaced, reassemble the faucet by reversing the steps you took to disassemble it. Make sure to tighten all of the connections securely. 9.

Turn on the water supply:

Once the faucet is reassembled, turn on the water supply and check for leaks. If there are any leaks, tighten the connections until the leaks stop.

Tips:

* If you are not comfortable working on plumbing, you can call a plumber to fix the dripping faucet. * If the faucet is old, it may be time to replace it. * To prevent future drips, it is important to clean the aerator regularly.