How To Restain Bathroom Vanity

Bathroom vanities are often the focal point of the bathroom, and they can make a big impact on the overall style of the space. If your bathroom vanity is looking tired and outdated, refinishing it is a great way to give it a new lease on life. Restaining a bathroom vanity is a relatively simple project that can be completed in a weekend.

Before you begin, you will need to gather a few supplies. These include:

Sandpaper (120-grit and 220-grit)
Tack cloth
Wood stain
Polyurethane
Paintbrush or foam applicator
Rags

Once you have your supplies, you can begin the process of restaining your bathroom vanity.

Step 1: Remove the hardware

The first step is to remove all of the hardware from the vanity, including the knobs, pulls, and hinges. This will make it easier to sand and stain the vanity.

Step 2: Sand the vanity

Once the hardware is removed, you can begin sanding the vanity. Start with the 120-grit sandpaper and sand in the direction of the wood grain. Once you have sanded the entire vanity with the 120-grit sandpaper, switch to the 220-grit sandpaper and sand again in the direction of the wood grain. This will help to smooth out the surface of the vanity and prepare it for staining.

Step 3: Clean the vanity

Once the vanity is sanded, you need to clean it to remove any dust or debris. Use a tack cloth to wipe down the vanity.

Step 4: Apply the stain

Now you can begin applying the stain. Use a paintbrush or foam applicator to apply the stain in the direction of the wood grain. Be sure to apply the stain evenly and avoid getting any drips or runs. Allow the stain to dry completely according to the manufacturer's instructions.

Step 5: Apply the polyurethane

Once the stain is dry, you can apply the polyurethane. Polyurethane is a clear finish that will protect the stain and give the vanity a glossy finish. Apply the polyurethane in thin, even coats, and allow each coat to dry completely before applying the next. You may need to apply several coats of polyurethane to achieve the desired finish.